BMYGV - 099-0000, 350 VOC S/T STAIN CLEAR

  • MSDS: BMYGV
  • Manufacturer: DECRATREND PAINT CORP
  • Product Name: 099-0000, 350 VOC S/T STAIN CLEAR
  • National Stock Number: 8010-00N028687
Product Identification

Product ID:099-0000, 350 VOC S/T STAIN CLEAR
MSDS Date:07/28/1988
FSC:8010
NIIN:00N028687
MSDS Number: BMYGV

Responsible Party
DECRATREND PAINT CORP
251 MASON WAY
CITY OF INDUSTRY, CA 91746
US

Emergency Phone: 818-333-4592

Info Phone: 818-333-4592

Cage: 42590

Contractor
DECRATREND PAINT CORP
CITY OF INDUSTRY, CA 91746 US

Telephone: 818-333-4592

Cage: 42590

Ingredients

SOLVENT NAPHTHA, MEDIUM ALIPHATIC; (ALIPHATIC HYDROCARBON).

CAS: 64742-88-7

Fraction By Weight: 35%

OSHA PEL 500 PPM (MFR)

ACGIH TLV: 100 PPM (MFR)


SODIUM DIOCTYL SULFOSUCCINATE; (DIOCTYL SODIUM

Fraction By Weight: <5%

ACGIH TLV: 100 PPM (MFR)


SILICON OXIDE; (SILICON DIOXIDE)

Fraction By Weight: <5%

ACGIH TLV: 6 MG/M3 (MFR)

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL:EXCESS INHAL OF VAPS CAN
CAUSE NASAL & RESP IRRIT, WEAK, DIZZ, FATG, NAUS, HDCH & POSS UNCON
& EVEN ASPHY. ASPIR INTO LUNGS CAN CAUSE CHEM PNEUM WHICH CAN BE
FATAL. SKIN:PRLNG/RPTD CONT CA N CAUSE MOD IRRIT, DEFAT, DERM. ORG
SOLVS ARE EASILY ABSORBED, DRYING OF SKIN, REDNESS/DERM ARE SIGNS
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:OF RPTD/OVEREXP TO THEIR DEFAT ACTION.
EYES:CAN CAUSE SEV IRRIT, REDNESS, TEARING & BLURRED VISION.
INGEST:CAN CAUSE GI IRRIT, NAUS, VOMIT & DIARR. CHRONIC:PRLNG/RPTD
EXPOS ABOVE TLV MAY RESU LT IN PERM BRAIN & NERV SYS DMG.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid

First Aid:EYES:FLUSH IMMED W/LG AMTS OF H*2O FOR @ LST 15 MIN. TAKE TO
MD FOR MED TREATMENT. SKIN:WASH AFFECTED AREA W/SOAP & H*2O. REMOVE
CONTAM CLTHG. CALL MD IF IRRIT PERSISTS. INHAL:REMOVE TO FRESH AIR.
RES TORE BRTHG. TREAT SYMPTOMATICALLY. CALLMD. INGEST:DRINK 1 OR 2
GLASSES OF H*2O TO DILUTE. DO NOT INDUCE VOMIT. CALL MD/POIS CTL
CTR IMMED. TREAT SYMPTOMATICALLY.

Fire Fighting

Flash Point Method:TCC
Flash Point:109F,43C
Lower Limits:0.5%
Upper Limits:6%
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD PRESS DEMAND/POS PRESS
SCBA & FULL PROT EQUIP . DURING EMER CNDTNS OVEREXP TO DECOMP PRODS
MAY CAUSE IMMED/DELAYED HLTH HAZS.
Unusual Fire/Explosion Hazard:VAPS ARE HVR/AIR & MAY TRAVEL ALONG
GROUND & BE IGNITED BY HEAT, OPEN FLAME/OTHER IGNIT SOURCES. KEEP
CNTNRS TIGHTLY CLSD. ISOLATE FROM HEAT, SPKS, ELEC(SUPDAT)

Accidental Release

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. DIKE,
CONTAIN/ABSORB W/INERT MATLS (SAND, VERMICULITE, ETC). TRANSFER TO
CONTAINERS FOR RECOVERY OR DISPOSAL. PREVENT RUNOFF INTO SEWERS,
STREAMS OR OTHER BODIES OF WAT ER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE OR USE NEAR SOURCES OF
HIGH TEMPERATURES, NEAR FIRE/OPEN FLAMES, OR OTHER IGNITION
SOURCES.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID PROLONGED OR REPEATED
EXPOSURE TO LEVELS ABOVE TLV.

Exposure Controls

Respiratory Protection:IF TLV IS EXCEEDED USE NIOSH/MSHA APPROVED
ORGANIC VAPOR & MIST, SUPPLIED AIR OR SCBA.
Ventilation:USE ADEQUATE MECHANICAL (GENERAL &/OR LOCAL) VENTILATION TO
MAINTAIN EXPOSURE BELOW TLV.
Protective Gloves:RESISTANT GLOVES, SUCH AS NITRILE RUB.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR IMPERVIOUS CLOTHING. EYEWASH STATIONS.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING RESTROOMS.
REMOVE & WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
EXPLO HAZ:EQUIPMENT, & OPEN FLAMES. CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:310F,154C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:0.9 (H*2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NONE
Appearance and Odor:TYPICAL FOR SOLVENT BASED COATING.

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:DO NOT EXPOSE TO HIGH TEMPERATURES OR OPEN
IGNITION SOURCES.
Hazardous Decomposition Products:MAY FORM TOXIC MATLS, CO*2, CO,
VARIOUS HYDROCARBONS, ETC ON THERMAL DECOMPOSITION.

Disposal

Waste Disposal Methods:DISPOSE OF I/A/W ALL LOCAL, STATE & FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.